Homepage | Morson Canada

Pickering

24-063 Project Controls Officer

Level: MP4 Duration: 12 months Hours of work: 35 Location: Darlington – RPO (Hybrid, 2 days remote) Job Overview 1. Front End Planning (FEP): Project team member responsible for coordinating, facilitating and driving the Front End Planning processes. Initiate and facilitate Risk Profiling, Project Breakdown Structure development. Review and provide input into project scoping and Basis of Estimates. Initiate and co-ordinate scoping, and risk workshops. Obtain labour estimates from resource providers. With support of project team members develop integrated, logically tied, resource loaded project schedules (Primavera P6) which incorporate identified scope, risks, estimates/budgets and constraints to the individual task level for field execution. With support of project team members, establish project plans, schedules and milestones. Preparation of Project Execution Plan Obtain concurrence on project plan from applicable stakeholders (eg. Engineering, Design, CMO etc). Support and author Business Case Summary development. Ensure detail, accuracy and quality is adequate to allow monitoring and control of project to ensure successful completion of cost, schedule and scope commitments. 2. Project Monitoring & Control: Develop and maintain updated and accurate conceptual phase schedule. Load approved project plan/schedule into applicable project control systems (eg AS7, P6, etc). Maintain alignment between source systems and project control systems throughout project life cycle. Perform weekly schedule updates. Perform weekly schedule analysis. Update schedule forecasts accordingly. Facilitate project metrics reporting and variance analysis. Identify actual and potential deviations from the approved annual, release or life cycle schedules to the Project Manager. Recommend corrective actions. With support of project team members, monitor project risks against Risk Management Plan and update as required. Recommend corrective actions. Provide Project team with specific project information as required. 3. Change Management: Ensure approved change control processes are followed. Prepare and obtain approval of applicable change control documentation. Timely update of project schedule once change approval or direction has been approved. Perform “What if” analysis for project team. Maintain project baseline integrity. Ensure all baseline changes are documented, appropriately approved and auditable. Maintain accurate historical project performance throughout change control process. 4. Cost & Schedule Quality: Maintain the project schedule such that it accurately reflects the current project plan, including field execution. Remediate any discrepancies and maintain alignment. Ensure accurate schedule updating/statusing. Maintain project schedule quality and accuracy. Critical path, float, predecessor and successor tasks identified, activities logically tied, minimal restraints etc. Monitor/verify standard project reports for accuracy. 5. Interface with Cross Functional Groups: Interface with all stakeholders to ensure project plans are accurately updated and maintained. Interface with station work control for execution of field work. Obtaining cost and schedule commitments from applicable resource providers (eg. CMO, Design , FE). Obtaining cost and schedule status and forecasts from resource providers. 6. Purchase Order Analysis & Reporting: Ensure applicable source systems are set up correctly to maintain alignment between forecasts and budgeted labour. Populate project control systems to accurately capture and allow monitoring of schedules and project deliverables. Monitor contractor schedule performance against project plan and identify actual or potential discrepancies to Project Manager. Recommend corrective actions. Monitor project PO’s (actuals, forecasts, payment status) and identify actual or potential issues to Project Manager. Recommend corrective actions. Liaise with Contractors’ project controls function to obtain project control information. 7. Closeout Phase: Facilitate and support project financial close out process. Final reconciliation and finalize/close out project controls and source systems (AS7, P6, SAP, etc). 8. Miscellaneous: Assist with continuous improvement of PMO processes and procedures. Assist in the development and continuous improvement of the project controls information system. Maintain document project file which provides an auditable trail throughout the project lifecycle including project approvals (ie BCS &PEP), change control (ie PCRAF, SSBCS, Baseline Change forms) and close out. Qualifications EDUCATION Requires knowledge of engineering/science encompassing subject area relevant to the project planning, scheduling, risk management, and control service needs of the division. Requires strong interpersonal and communication skills, including relevant business and computer applications knowledge, to develop and maintain computerized project information, costs and forecasts. This knowledge is considered to be normally acquired through the successful completion of a four-year university education in an appropriate field such as Business, Finance or Engineering, or by having the equivalent level of education. EXPERIENCE Requires experience to become familiar with project controls principles, theories, and concepts such as project scoping, risk management, estimating, budgeting and scheduling. Requires experience of project management within a Nuclear, Hydroelectric or Thermal generating facility within a project management support capacity. Requires experience to become familiar with engineering and construction management concepts, methods and techniques. Requires experience to become familiar with the development and operation of various computerized systems and databases, including business unit financial and work management systems, including scheduling systems such as Primavera P6. Requires experience to become familiar with corporate financial processes. Requires experience to become familiar with departmental and divisional interfaces with other areas of the Corporation. A period of over 6 years is considered necessary to gain this experience.
Apply now
Montreal

Ingénieur Stress - Aéronautique/Aerospace Stress Engineer

Ingénieur en stress - Contrat - Montréal Nous collaborons actuellement avec un acteur majeur de l'industrie aéronautique, en l'aidant dans sa recherche d'ingénieurs en stress talentueux pour rejoindre son équipe à Montréal, QC. APERÇU DU POSTE : Votre expertise sera déterminante dans nos ambitieux projets d'envergure. En tant que membre clé d'une équipe d'ingénieurs diversifiée, vous appliquerez vos compétences en calcul et en analyse pour calculer la résistance aux charges limites et ultimes, évaluer les dommages dus à la fatigue et déterminer la tolérance aux dommages pour le développement de systèmes novateurs. PRINCIPALES RESPONSABILITÉS : Vous serez chargé(e) d'effectuer des analyses structurelles de divers composants ou sous-systèmes afin de garantir leur capacité à résister aux charges lors d'essais rigoureux en laboratoire et dans des conditions opérationnelles. Votre contribution sera essentielle dans un environnement d'équipe collaboratif où le partage d'idées et d'informations critiques est indispensable pour concevoir des produits de pointe durables, rentables et légers. QUALIFICATIONS : Diplôme d'ingénieur en mécanique et/ou en aéronautique. Au moins cinq ans d'expérience en analyse des contraintes (statiques et de fatigue) dans l'industrie aérospatiale ou dans un domaine connexe. Maîtrise des analyses de contraintes de pièces solides et épaisses Un fort état d'esprit de conceptualisation combiné à une approche pratique des compétences exceptionnelles en matière de résolution de problèmes pour relever des défis techniques complexes un sens aigu des priorités et des capacités d'organisation Familiarité et expérience professionnelle (minimum 3 ans) avec les logiciels de calcul par éléments finis (une expérience avec ABAQUS est un atout). La maîtrise du français serait un avantage. --------------------------------------------------------------------------------------------------------------------- Stress Engineer - Contract - Montreal We are currently collaborating with a leading player in the aviation industry, assisting them in their quest for talented Stress Engineers to join their team in Montreal, QC. POSITION OVERVIEW: Your expertise will be instrumental in our ambitious large-scale projects. As a key member of a diverse engineering team, you will apply your computational and analytical skills to calculate resistance to limit and ultimate loads, assess fatigue damage, and determine damage tolerance for the development of innovative systems. KEY RESPONSIBILITIES: You will be tasked with conducting structural analyses of various components or subsystems to ensure their ability to withstand loads during rigorous laboratory testing and operational conditions. Your contributions will be pivotal in a collaborative team environment where sharing critical ideas and information is essential for designing cutting-edge products that are durable, sustainable, cost-effective, and lightweight. QUALIFICATIONS: Possession of a Mechanical and/or Aeronautical Engineering degree Minimum of five years of experience in stress analyses (static and fatigue) within the aerospace industry or a related field Proficiency in stress analyses of solid and thick parts A strong conceptualization mindset combined with a practical approach Exceptional problem-solving skills for tackling complex technical challenges A well-honed sense of priorities and organizational abilities Familiarity and professional experience (minimum 3 years) with finite element software (experience with ABAQUS is advantageous) Proficiency in French would be advantageous
Apply now
Montreal

Ingénieur en conception mécanique d'aéronefs/Aircraft Mechanical Design Engineers

Ingénieur en conception mécanique d'aéronefs - Contrat - Montreal Nous soutenons une entreprise de premier plan dans l'industrie de l'aviation qui est à la recherche d'ingénieurs en conception mécanique pour son bureau de Montréal, au Québec. Principales responsabilités : Participer à la conception et à l'avancement des systèmes d'aéronefs, chacun ayant ses propres exigences, notamment en matière de fiabilité, de poids, de matériaux, d'assemblage, d'essais et de coûts. En tant que spécialiste de la conception, vous prendrez des décisions qui auront une incidence importante sur la durée de vie du produit. Votre rôle consiste à proposer des solutions innovantes pour concevoir des systèmes mécaniques optimisés qui répondent aux critères du client. Vous utiliserez le logiciel CATIA V5 pour la conception des composants, de la modélisation 3D au dessin 2D ou 3D. Vos conceptions seront validées par des analyses de contraintes, de fatigue, d'endurance, d'ergonomie, de fiabilité et de maintenabilité. Qualifications : Diplôme d'ingénieur en mécanique et/ou en aéronautique 2 à 5 ans d'expérience en conception aéronautique Expérience en modélisation CAO et en production de plans de fabrication Maîtrise de CATIA V5 et d'Enovia 3DX Connaissance du tolérancement géométrique Compétences en matière de conceptualisation et approche pratique Capacité à résoudre des problèmes techniques complexes Bilingue en français et en anglais -------------------------------------------------------------------------------------------------------------------- Aircraft Mechanical Design Engineers - Contract - Montreal We're supporting a leading company in the aviation industry as they seek Mechanical Design Engineers for their Montreal, QC location. Key Responsibilities: Engage in the design and advancement of aircraft systems, each with its own unique requirements including reliability, weight, materials, assembly, tests, and cost considerations. As a design specialist, you'll make decisions that significantly impact the product's lifespan. Your role involves proposing innovative solutions to design optimized mechanical systems that meet customer criteria. You'll utilize CATIA V5 software for component design, from 3D modeling to 2D or 3D drawing. Your designs will undergo validation through stress, fatigue, endurance, ergonomics, reliability, and maintainability analyses. Qualifications: Mechanical and/or aeronautical engineering degree 2 to 5 years of aeronautical design experience Experience in CAD modeling and manufacturing drawing production Proficiency in CATIA V5 and Enovia 3DX Knowledge of geometric tolerancing Conceptualization skills and a practical approach Ability to solve complex technical problems Bilingual in French and English
Apply now
Ontario

24-062 Sr. Technical Engineer/Officer (Electrical)

24-062 Sr. Technical Engineer/Officer (Electrical) Resume Due Date: Monday, April 29th, 2024 (5:00PM EST) Number of Vacancies: 1 Level: MP4 Hourly Rate: $60 - 75/hour Duration: 12 months Hours of work: 35 Location: Darlington (100% on site) Job Overview KEY ACCOUNTABILITIES Prepare and/or verify Design Change Packages such as Modifications, Temporary Modifications and Non-Identical Component Replacements Prepare comprehensive technical documentation including technical specifications, data sheets, Instrument Calibration Sheets (ICSs), Electrical Wiring Diagrams (EWDs), Connection Wiring Diagrams (CWDs), cable-block diagrams, Environmental Qualification (EQ) documentation. Review and accept updates to Instrument Uncertainly Calculations (IUCs) Conduct thorough research and analysis of electrical and I&C components, equipment, and materials, evaluating their suitability, performance, and cost-effectiveness for specific applications Address design related field issues; Provide assurance that an engineering activity such as modification perform its intended function without adversely impacting a nuclear facility’s design basis or causing a deterioration of a facility’s design margin; Provide advice and/or direction to Operations/Maintenance/Performance Engineering, review designs and sign Field Initiated Changes Perform field support during troubleshooting, inspections, acceptance and approvals Engage in correspondence with various regulatory bodies including Canadian Nuclear Safety Commission (CNSC); Maintaining written documented processes and procedures to reflect improved operating methods and additions to all supported systems Work collaboratively with internal and external stakeholders to accept designs and changes Provide Engineering Change Control guidance, provide active support to field issues and Field Initiated Changes, and facilitate a positive outcome with Engineer-Procure-Construct (EPC) vendor partners Understand impacts on cost and schedule, and provide support to minimize impacts driving projects Gather input from stakeholder departments and agencies to ensure project requirements are captured and detailed in the project documents Maintain process compliance during project execution. Qualifications EDUCATION Bachelor’s degree in engineering or applied science, preferably Electrical discipline Candidate must be a fully licensed engineer in the province of Ontario, or be eligible to be licensed in the Province of Ontario QUALIFICATIONS Minimum 8 years-experience in a similar role Design and construction experience, preferably with Nuclear or Power/Utility industries Familiar with common engineering processes and practices, such as Work Management, Engineering Change Control, Action Tracking, and station reporting; familiarity with OPG quality assurance program is an asset Strong knowledge of instrumentation and control principles, including sensors, transmitters, control valves, PLC/DCS systems, and SCADA Experience with ETAP and relay protection coordination, load-flow, motor-starting, arc-flash studies will be an asset Project management, leadership and work coordination experience Ideal candidate will be Design Engineer / Design Team Lead qualified or previously qualified within OPG Nuclear or similar Candu Nuclear Power Plant Experience in producing design engineering deliverables including, but not limited to conceptual design, front end engineering, detailed design engineering, calculations, technical specifications, design requirements, is considered an asset Relevant work experience with Nuclear Codes and Standards including, but not limited to CSA N285, ASME, ISA, CSA C22.1, Ontario Electrical Safety Code (OESC), N286, N299 and other standards related to Electrical, I&C, or Mechanical design Depending on technical discipline, knowledge in one or more of the following areas is considered an asset: Environment Qualification (EQ), Seismic Qualification, Software Qualification, Equipment Sizing and Design, Procurement Engineering, Procurement, Nuclear System Design, Pressure Boundary, Stress Analysis, Cyber Security, Electrical System Analysis and Calculations Experience and ability as a team player to understand and manage the interrelationships of various internal and external groups in order to facilitate objectives and ensure projects satisfy stakeholder requirements Demonstrated ability to lead and mentor a team of engineers, fostering a collaborative and innovative work environment Strong written and verbal communication skills Have a strong interest in fast-paced, challenging work environment where showing initiative and self-motivation are assets; proven track record on delivering results; Strong in understanding, executing and following governance and procedures with a questioning and analytical attitude/approach under minimum required supervision Knowledge of OPG’s ECC Process (Engineering Change Control) will be an asset Requires understanding of problem-solving processes to evaluate and propose improvements to processes, equipment and systems or to unit safety, reliability and performance; Candidate with a P.Eng will be an asset.
Apply now
Toronto

24-061 Project Manager

24-061 Project Manager Resume Due Date: Monday, April 29th, 2024 (5:00PM EST) Number of Vacancies: 1 Level: MP6 Hourly Rate: $75 - 89/hour Duration: 12 months Hours of work: 40 Location: 700 University Ave (Hybrid, 3 days remote) Job Overview Plan, organize and direct the execution of prescribed Design/Modification capital and OM&A projects. Obtain resources, execute, and control all aspects of assigned projects following Project Management Manual Guidelines including the preparation of project execution plans, project schedule, project budget, and resource problems. Manage the design, installation and commissioning activities of assigned projects. Ensure team members understand and utilize approved project management processes. Resolve issues and problems to ensure that project deliverables are achieved as per plan, and that any changes to scope or plan are managed and approved. JOB DUTIES To plan, organize and direct the execution of prescribed Design/Modification capital and OM&A projects meeting safety, performance and quality requirements within budget and schedule commitments. Develop, plan, organize, obtain resources and/or resource commitments, execute, and control all aspects of assigned projects following Project Management Manual Guidelines including the preparation of Project Execution Plans, project schedule, project budget, and resource problems. Manage the design, installation and commissioning activities of assigned projects ensuring all project objectives and commitments are controlled and delivered within targets of safety, quality, budget and schedule. Ensure team members understand and utilize approved project management processes. Support Committing Authority in the development of concept options, preparation of business case summaries, project charter and coordination of activities in support of obtaining project funding. Liaise with the Committing Authority to ensure that scope and requirements are clearly defined and that format change request procedures are followed. Maximize the effectiveness of the team in establishing and communicating clear expectations regarding roles, accountabilities and conduct of team members. Ensure that all activities required to achieve project deliverables are in compliance with all station change control, QA, OP&P, safety and other pertinent procedures. Resolve issues and problems, as necessary to ensure that project deliverables are achieved as per plan, and that any changes to scope or plan are managed and approved. Qualifications Requires knowledge of business administration, management theory and organizations to be able to effectively understand the group dynamics and interrelationships of the organizations coordinated to carry out the accountabilities of engineering projects. Requires a good knowledge of English in terms of both oral and written communication skills to understand and apply policies, practices, governing document frameworks, etc, and convey same to others in an effective manner. Requires knowledge of technical writing to review and approve engineering standards and reports clearly and concisely. This knowledge is considered to be normally acquired through the completion of 4 years of University training. Requires experience in project management and all aspects of engineering management processes. Requires experience to comprehend, interpret and apply Operating Policies and Principles, administrative policies and procedures, radiation protection policies, practices and standards affiliated with related project design. Requires experience to be able to provide functional advice and guidance and interpretations of engineering programs, standards and procedures. Requires experience with the supervisory aspects of the position. A period of over 8 years and up to and including 10 years is considered necessary to gain this experience.
Apply now
Québec

Inspecteur de la qualité des pièces d'avion

Inspecteur de la qualité des pièces d'avion Nous sommes à la recherche d'un Inspecteur de la qualité des pièces d'avion pour rejoindre notre équipe dynamique. Si vous êtes passionné par l'assurance qualité et que vous souhaitez contribuer à l'amélioration continue des processus, nous avons une opportunité passionnante pour vous. Responsabilités : Respecter les normes les plus élevées en veillant à la stricte conformité avec l'ensemble des politiques et procédures de l'entreprise. Devenir un maître de l'évaluation des pièces, en déterminant le sort des pièces inutilisables avec précision et expertise. Prendre en charge l'évaluation du coût de la réparation et de la révision des pièces en quarantaine, en faisant preuve d'un sens aigu des finances. Plongez dans la tâche passionnante de la réception et de l'évaluation de marchandises provenant de diverses sources, en mettant en évidence votre sens aigu du détail. Vous serez l'ultime certificateur, apportant le sceau d'approbation pour toutes les pièces nécessaires à notre flotte d'aéronefs. Collaborer de manière transparente avec notre équipe de la chaîne d'approvisionnement et nos fournisseurs, en veillant à ce que l'assurance qualité soit de premier ordre. Se faire le champion de nos programmes de sécurité et de notre système de gestion de la qualité, en garantissant l'excellence dans tous les domaines. Vous gardez une longueur d'avance en suivant des cours de formation, ce qui vous permet d'améliorer continuellement vos qualifications. Partager vos connaissances en formant et en guidant les autres membres de l'équipe sur leur lieu de travail. Maintenir et mettre à jour les données de base essentielles relatives à la certification, au statut et à l'état, en veillant à l'exactitude et à l'efficacité. Accepter toute tâche ou tout défi supplémentaire assigné par votre superviseur avec enthousiasme et une attitude positive. Qualifications : Licence M1/M2 5 ans d'expérience dans une fonction similaire Expérience de la certification de pièces d'aéronefs. MS Office - Word, Excel et Outlook Rejoignez notre équipe dès aujourd'hui pour contribuer à notre engagement envers l'excellence opérationnelle et la satisfaction client. Envoyez votre CV actualisé à fernanda.kisgerotz@morsoncanada.com Job description Quality Inspector for Aircraft Parts - Permanent We are looking for a Quality Inspector for Aircraft Parts to join our client's state-of-the-art facility team in Montreal, QC. This could be the perfect opportunity for you if you are passionate about the world of aviation and have fun doing it! Responsibilities: Hold to the highest standards by ensuring strict compliance with all company policies and procedures. Become a master of part evaluation, determining the fate of unusable parts with accuracy and expertise. Take charge of the cost assessment of the repair and overhaul of quarantined parts, demonstrating a keen sense of finances. Immerse yourself in the exciting task of receiving and valuing goods from various sources, highlighting your keen eye for detail. You will be the ultimate certifier, bringing the seal of approval for all parts needed for our fleet of aircraft. Collaborate seamlessly with our supply chain team and suppliers, ensuring quality assurance is top-notch. Champion our safety programs and quality management system, ensuring excellence in all areas. You stay ahead of the curve by taking training courses, allowing you to continuously improve your qualifications. Share your knowledge by training and guiding other team members in the workplace. Maintain and update critical master data related to certification, status, and condition, ensuring accuracy and efficiency. Accept any additional tasks or challenges assigned by your supervisor with enthusiasm and a positive attitude. Qualifications: M1/M2 License 5 years of experience in a similar role Experience in aircraft parts certification. MS Office - Word, Excel and Outlook This position offers a competitive salary commensurate with experience. If you possess the required skills and are passionate about maintaining high-quality standards, we encourage you to apply for this exciting opportunity as a Quality Control Inspector. Send your updated resume to fernanda.kisgerotz@morsoncanada.com
Apply now

Banner Default Image

Banner Default Image